Table Specifications

Here are plans to build the tables that we (MichLTC/MichLUG) use for our shows. They are designed to match the LEGO baseplates. The large is 3 baseplates by 6 and the small is 3 by 3. Steve Ringe designed these with intentions of allowing elevation drops and shelves to be easily added. Credit goes to Ben Fleskes of PNLTC who designed their tables, Steve used their design as a starting point.

Large Table Asm
-»Table Top Surface Large
-»Stringer A
-»Stringer C
-»Stringer D
-»Brace Leg

Small Table Asm
-»Table Top Surface Small
-»Stringer B
-»Stringer C
-»Brace Leg

Leg Asm
-»Leg
-»Gusset Large
-»Gusset Small

Drop Legs Asm
-»Leg
-»Gusset Small
-»Stringer C
-»Table Drop Adapter
-»Drop Leg Trim

Shelf Asm
-»Shelf Surface
-»Shelf Bracket B
-»Stringer C

Corner Shelf Asm
-»Corner Shelf Surface
-»Shelf Bracket A
-»Shelf Bracket B

Controller Shelf Asm
-»Shelf Surface
-»Shelf Bracket B
-»Stringer C

 Barrier
Plywood Pattern Cut Sheet Complete Table Drawing Zip

Assembly Information:

Numerous configurations are possible, limited only by the number of tables you build. Assembly is completed by simply bolting tables and legs together with 5/16" x 4" bolts. Legs can be placed as required to support the modules. If X equals the number of tables you have, you will generally need 2X+2 legs.  Legs bolt into table corners as shown in the drawings.